Single and double reduction planetary equipment drives to be utilized with electric, hydraulic, air motors or mechanical power insight from high swiftness, low torque sources to deliver reduced speeds at increased torques. The input aspect has regular SAE pads for engine mounting. Available in the three result configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
Solitary reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with essential parking input speed is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Devices provide 95% power transmitting efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output side has hub for installation vehicle wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage Plastic Gear Rack feature can be regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side includes a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and heat treated ring equipment to minimize backlash growth caused by wear. The exterior bearing nut provides the best in shaft retention and shaft strength. Output can be a spindle shaft or numerous sizes of integral pinion gears.