DUMP TRAILER Energy UNIT-DOUBLE ACTING
This power unit has a energy up electrical power down circuit with load holding on each A & B ports. A strain compensatred flow management can be extra to circuit to manage the decent pace of your cylinder.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned in advance of set up of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which should really also be clean and cost-free of impurities. N46 hydraulic oil is recommended.
4. The power unit ought to be mounted horizontally.
five. Check the oil degree inside the tank after the initial running of your power unit.
six. Oil shifting is needed right after the original one hundred operation hrs, afterwards the moment every 3000 hrs.
DUMP TRAILER Energy UNIT- SINGLE ACTING
This energy unit has a power up gravity down circuit. Get started the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve is usually provided if necessary. Also a pressure compen sated flow management might be added for the circuit to manage the descent speed with the cylinder.
Remark: Please consult our product sales engineer for that various pump displacement, motor power or tank capacity.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned just before set up of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which need to also be clean and absolutely free of impurities.N46 hydraulic oil is proposed.
four. The energy unit really should be mounted horizontally.
5. Check the oil level during the tank immediately after the first running from the energy unit.
6. Oil modifying is required just after the initial a hundred operation hrs, afterwards the moment each 3000 hours.