Micro channel parallel movement radiator expert maker
The condenser-a part of the air conditioning circuit-is integrated into the motor cooling module, exactly where it is utilized to amazing down and condense the compressed, gaseous refrigerant from the compressor. We produce brazed, flat tube condensers that deliver large functionality in spite of their compact and light-weight style. They make sure fast cooling of the passenger compartment thanks to optimum matching of heat transfer and strain fall on each the coolant and the air aspect.
The condenser is a heat exchanger in a cellular A/C method. Today, condensers are normally manufactured of aluminum, but in the previous, some had been created of copper/brass. Condensers look really significantly like radiators, just a little thinner, and because they also depend on air flowing by means of them, are generally situated in front of the radiator.
Like radiators and evaporators, condensers are also made as a series of tubes with fins all around them. its job is to launch warmth. A lot more specifically, to release the warmth the refrigerant absorbed while it was flowing via the evaporator, very considerably the identical way the radiator releases the heat from motor coolant that the coolant absorbed while it was flowing by means of the engine. The refrigerant enters the condenser as a higher-force vapor, but as it flows through the condenser and cools, it turns again into a cooler higher-stress liquid.
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory
1. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
two. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
3. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
4. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
five.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
6. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
seven.Only when we have an independent team with high efficiency can we satisfy CZPT demands.
Extended phrase organization is primarily based on our dependable providers, fast respond and our specialist expertise to Vehicle AC. We will turn out to be your associate, not just your supplier.
one.CAD Drawing, and mould style base on your sample
two.Mould examination and sample verification just before mass manufacturing.
3.CZPTers of a variety of shipping and delivery lines.
4.aggressive freight offers and 1-end support on clearing, transport troubles.
|Q1. Are you a manufacturing unit or buying and selling business?||A: we are a self -very own manufacturing facility, we give 1-quit services for our clients, from spare components to condenser, from specialized product sales to shipping and delivery and to after-revenue, so as to save the value for consumer, management the quality and lead time, provide the best providers|
|Q2: The place is your manufacturing unit found? How can I go to there?||A: Our manufacturing unit is found in HangCZPT, Shan dong, China.
The nearest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport.
|Q3. What is actually the manufacturing time for new molds and mass creation?||A: seven-ten times to create the new moulds, mass production will take about twenty-25days for one particular 20gp,twenty five-30days for one 40hq, can approach urgently if require.|
|This autumn: What is the payment conditions?||A: Telegraphic Transfer (T/T) and Letter of Credit history (L/C).|
|Q5: Can you send out me samples?||A: Indeed, Samples are for cost-free, and freight is on your side.|