Materials Dealing with Power UNIT 2
Basic Description
This energy unit capabilities energy up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing motion is activated from the solenoid valve with all the reducing pace managed by the pressure compensated movement control valve. Merchandise of this series may be extensively utilized in the sector of logistic units including fork lift, mini lift table, and so forth.
Exclusive Notes
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean all the hydraulic parts concerned ahead of mounting the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities, N46 hydraulic oil is advised .
four. Oil altering is needed after the preliminary one hundred operation hours,afterwards the moment just about every 3000 hrs.
five. The electrical power unit must be mounted horizontally.

Material Dealing with Power UNIT one
Common Description
This electrical power unit is intended for that fork lift marketplace, consisting of extremely productive gear pump, DC motor, manual raise and decrease valve, tank, ect. The up and down motion are controlled through the lever with the manual release valve, that is outfitted with an electrical switch to activate the motor. The lowing pace is controlled through the stress compensated movement management valve.
Specific Notes
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned ahead of installation of the power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which must also be clean and free of charge of impurities, N46 hydraulic oil is advised .
four. Oil shifting is needed right after the preliminary one hundred operation hrs, afterwards after each 3000 hrs.
five. The power unit proven is created to be mounted horizontally.