Galvanized PVC Coated Welded Wire Mesh Fence Panel Welding Machine

galvanized pvc coated welded wire mesh fence panel welding device

Mesh welding device series:

Reinforcing mesh welding device, fence mesh welding machine, animal cage welding machine, steel grating welding machine, roll mesh welding equipment, wedged wire display welding machine, wire straightening and slicing machine etc.

Mesh weaving machine series:

Chain website link fence equipment, barbed wire device, nail generating device, wire drawing machine, expanded metallic mesh machine, expanded metallic device, gabion mesh device, hexagonal wire mesh machine, crimped mesh machine and so on.

Parameter of machine 

Product  DP-FP-2500A  Wire diameter  2.five-6mm/three-5mm
 Line wire place  50-300mm  Cross wire area  25/twelve.5mm-300mm
 Width of mesh  Max.two.5m  Length of mesh  Max.6m
 Welding electrodes  48pcs  Welding speed  50-seventy five times/min
 Rated electrical electricity  125kva*6pcs  Needed power  Min.160kva
 Weight  4.2T  Overall size  5.4m*3.two*1.7m

Details of machine 

Principal technologies 

     1.The control panel is a lot more smart, quite easy to run. (Panasonic PLC software)

     2.The longitude wires must be inserted into slot tunnels (cast iron material), suitable for different diameter.

     3.The cross wires are fed from cross wire feeder, managed by phase motor and SMC (Japan) air cylinder.

     4.Pure purple copper (upper) and chromised bronze (reduced), durable.

     5.Clutch motor and helical gear reducer link the principal axis immediately, welding steady.

     6.Casting water-cooling welding transformers, higher effectiveness. The welding degree is altered by PLC.

     7.Panasonic (Japan) servo motor+planetary reducer and SMC (Japan) air cylinders for pulling mesh.

     8.The cable drag chain is Igus model, imported from Germany, not very easily hold down.

Wire feeding way

      The longitude wires and cross wires need to be pre-straightened and pre-reduce.

      1.The longitude wires are inserted into the slot tunnels manually.

      2.The cross wire are put into the cross wire feeder, which is controlled by step motor&SMC (Japan) air cylinders,automatic slipping.

Loading & delivery

Speak to us 
Sales:Elaine Lu
Fb account: ElaineLu357622


Galvanized PVC Coated Welded Wire Mesh Fence Panel Welding Machine