Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive of up to approx 270 degrees for instance on camera focus bands. They also offer an economical option where a huge gear is required or a longer stretch (up to 2 metres) of linear motion is preferred. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear movement applications. You can expect a large collection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Has the highest power and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing is certainly applied just within the tooth region. J Series items are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Temperature treated surface gears with high precision and strength has excellent cost-performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack manufactured from Chromoly steel, treated by carburizing. Has high-power, high wear resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, extended life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth height and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and number of teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and quantity of the teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large selections of modules and number of the teeth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Ideal for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lesser water than MC Nylon racks. J Series items are also available.
Plastic-type Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-trimming brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal movement. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Make use of where rust-resistance is required.
Floor Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low sound and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Flexible Racks (DR) : Found in applications because of its flexibility, where steel racks do no possess this attribute. Pinions and components are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Guidebook Rails (ARL) : Guide Rails for Molder Flexible Racks.
We offer as standard a wide range of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres in length. STAINLESS and Delrin (Plastic material) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials are available on ask for. Moulded Hostaform Racks are available to offer an economical alternative where much less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Based on the mechanism of a flexible rack and gear, a rotational joint actuator named vsaFGR can be proposed to modify the joint stiffness. The flexible gear rack could be regarded as a mixture of a nonlinear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-purchase of the gear displacement, and nearly independent from the joint angular deflection, providing benefits of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with respect to the flexible gear rack is usually perpendicular to the joint loading force, so the power required for stiffness regulating is really as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to set up rotational drive of up to approx 270 degrees for instance on camera focus rings. They also offer an economical solution where a big gear is required or an extended stretch (up to 2 metres) of linear motion is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear movement applications. You can expect a large selection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest power and precision in the EVER-POWER standard rack series. Bolt holes can be remachined as carburizing can be applied just within the tooth area. J Series products are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : High temperature treated surface gears with high precision and strength has excellent cost-overall performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high strength, long life span are reasonably priced. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and face width sizes, more compact and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and quantity of the teeth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and quantity of the teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and quantity of teeth. J Series products are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series items are also available.
Plastic-type material Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-trimming brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal movement. S Type is easy to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is necessary.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low sound and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications due to its flexibility, where metallic racks do no possess this attribute. Pinions and add-ons are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded versatile racks.
Flexible Rack Guidebook Rails (ARL) : Guide Rails for Molder Versatile Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres long. STAINLESS and Delrin (Plastic) Racks are created with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials are available on demand. Moulded Hostaform Racks are available to offer an economical alternative where much less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Based on the mechanism of a versatile rack and equipment, a rotational joint actuator called vsaFGR is definitely proposed to modify the joint stiffness. The versatile gear rack can be regarded as a mixture of a non-linear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is definitely in the number of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the gear displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with regards to the flexible gear rack is definitely perpendicular to the joint loading pressure, so the power required for stiffness regulating is really as low as 14.4 W, providing advantages of energy conservation. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.