Any harm within the teeth surfaces of a sprocket diminishes the existence in the conveyor chain.
With conventional sprockets, significantly worn sprocket teeth had been repaired by teeth padding or the whole sprocket was replaced. In either situation, repair was expensive and with teeth padding, accuracy was impaired. We formulated new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our clients for that dramatic savings in expense and time.
The teeth may be replaced by two methods: person tooth replacement or sectional teeth substitute.
The bolts and nuts utilized for mounting the teeth on on the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated to the right.
The above photo plus the major right illustration show a sprocket for individual tooth substitute. Because the joint face involving the replaced teeth and the sprocket is formed in the exceptional arc, the bonding accuracy is higher along with the sprocket power is enhanced. In addition, because the load acting within the mounting bolts is decreased, there’s much less probability of loosening. This sprocket construction is patented.
You will find two varieties of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilised for massive sprockets getting hefty loads and welded sheet steel hubs for other applications.