DC MOTOR PUMP GROUP 1
Common Description
Consisting of a heavy duty DC motor plus the CB1S gear pump, this pump motor group is surely an ideal hydraulic electrical power unit for mobile hydraulic equipments, such as car or truck carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP 2
Basic Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP three
Basic Description
This motor pump consists of a four.5″ DC motor in addition to a CBSR gear pump that has a normal power up/gravity down circuit by using a relief valve, a examine valve in addition to a solenoid release valve.
Special Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned in advance of mounting the power unit.
3. Viscosity from the hydraulic oil shoud be 15~68 cst, which really should also be clean and absolutely free of impurities. N46 hydraulic oil is encouraged.
four. The electrical power unit must be mounted horizontally.
5. The relief valve stress is preset about 25% higher compared to the operating stress.
six. Flow management valve for lowing pace adjustment is available unpon request.